Versatile, compact tool kit helps prevent minor firearm malfunctions from ending your field outing ahead of schedule. Like our popular gun-specific Field Maintenance Packs, this kit was developed for serious shooters who are on the go, and features only the highest quality, longest lasting gunsmithing tools available.
These tools were carefully selected by our gunsmithing technicians for general field repair and maintenance of a host of firearm types, so you’re as prepared as possible to tackle those readily correctable problems that occur when you least expect them. Perfect for the competitive shooter, avid hunter, and mobile armorer who need the basics to help field strip and perform minor repairs and cleaning of handguns and long guns.
Our extra-tough, 1000 denier Cordura field case, with individual tool pouches, keeps everything protected and organized, so there’s no down time scrounging for something to substitute for the right tool. Our specially configured Magna-Tip screwdriver set with #81 handle, polyethylene case, and bench tray filled with 23 of the most commonly used slotted, hex, Phillips, and Torx bits will handle the majority of gun screws in existence. An additional miniature screwdriver set gives you six double-ended Phillips, slotted, and Torx quick-change bits to take care of those really small but critical gun fasteners. And, the knurled swivel top driver handle provides finger-tip control to prevent gouging or losing those really tiny screws.
Extra-long, buttstock screwdriver makes it fast and easy to remove most shotgun stocks. We’ve also added the most commonly used steel, starter and pin punches. Easily start, remove, and install spring pins and roll pins in most guns without damage to the pin or firearm itself. Steel punches are individually marked for size. Also included is a non-marring, nylon drift punch for making minor sight adjustments as well as a host of other jobs. A smooth cut file with handle takes care of those unforeseen problems that require minor metal removal; additional handle inserts accept many other file sizes you may wish to add to your kit. Medium grit, India stone allows you to lap, hone, sharpen, or polish out small metal imperfections.
Additional tools include a steel packing hook for releasing springs, a 6" chain nose pliers for grabbing and holding small parts, a nylon bench block with “V” center, a nylon/brass hammer, and a double-ended gun parts cleaning brush. Lay everything on the soft, flexible neoprene gun mat to safeguard your gun’s finish during cleaning or repair. Available with Black or Coyote Tan field case.
SPECS: Total kit weight - 4 lb. 13 oz. (2. 2 kg). Includes: Magna-Tip Set - #81 Driver Handle. 1¼” (3.2cm) diameter. 73⁄4” (19.7cm) OAL. Polyethylene Bench Box & Tray - 85⁄8” (21.8cm) long, 4¼” (10.8cm) wide, 17⁄8” (4.7cm) high. Slotted Bits - #120-1, #150-4, #180-3, #180-5, #210-5, #240-5, #300-6 and #360-8, Leupold Windage bit. Hex Bits - #185-00, #185-0, #185-1, #185-2, #185-3, #185-4, #185-9 and #185-10. Phillips Bits - #1, #2, #3 and 2” long bit. Torx Bits - T10 and TT15. Punches - Steel, knurled handle. Starter Punches - Contains (1) of each diameter: 1⁄16” (1.6mm), 3⁄32” (2.4mm), 4” long w/knurled handle. Pin Punches - Contains (1) of each diameter: 1⁄16”, 3⁄32”, 1⁄8” (3.2mm), 5⁄32” (4mm) x 4” long w/knurled handle. Nylon Punches - Contains (3) of each: 4” (10.2cm) long x 5⁄16” (7.9mm) diameter. Parts Cleaning Brush - Polypropylene handle w/ nylon bristles. 7” (17.8cm) long. Meets Mil Spec 129J, NSN# 1005-00-494-6602. Buttstock Screwdriver - Steel alloy blade w/wood handle. 12” (30.5cm) OAL. Tip - 3⁄8” (9.5mm) wide, 1⁄16” (1.6mm) thick. Miniature Screwdriver Set - (4) Phillips (000, 00, 0, 1) bits. (4) slotted (1.5, 2.0, 2.5 and 3.2mm) bits. (4) TORX (T-7, T-8, T-9 and T-10) bits. File - Smooth cut. 5½” (14cm) long, 9⁄16” (1.4cm) wide x 7⁄64” (2.8mm) thick. File handle - Molded rubber. 4½” (11.4 cm) long. India Stone - 4” long x 3⁄8” wide, MF-34. Bench Block - Nylon w/"V" groove. 2½” (6.3cm) diameter. 1½” (3.8cm) high. 4½” oz. (128g). 5 holes range from .122” (3.1mm) to .375” (9.5mm). Nylon/Brass Hammer - 1” (2.5cm) diameter faces. 11½” (29.2cm) long hickory handle. Packing Hook/Scribe - Steel. 8” (20cm) OAL. Chain Nose Pliers - 6” (15cm) long. Gun Mat - Neoprene rubber w/nylon facing, black. Storage Case - 1000 denier Cordura nylon, Black or Coyote Tan. 13” (33cm) long, 3” (7.6cm) wide, 10” (25cm) high.